Please note: there have been reported issues with these cameras.
Aero Ranger currently supports integration with Milesight ANPR cameras via HTTP POST. The below instructions assume your Milesight device is set up successfully capturing vehicle data from within the Milesight configuration page. Ensure your Milesight camera is set to the GMT+0 timezone. Navigate to the web configuration interface for your Milesight camera.
On the left-hand menu, select Settings > LPR > LPR Settings
Click 'LPR Message Post Settings' to open the dropdown panel and enter the following settings:
Enable LPR Message Post: Checked
Post Type: HTTP
HTTP Notification URL: https://dashboard.api-aeroranger.com/public/v1/upload-milesight/[USERNAME]/[PASSWORD] (Where [USERNAME] and [PASSWORD] are replaced with the Username and Password you created earlier on the Aero Ranger Dashboard 'Add 3rd Party Device' page.)
User Name: [leave blank]
Password: [leave blank]
Select Save to save your settings.
If you experience any issues integrating your camera, don't hesitate to get in touch via [email protected]